Model Number: YDR-201 Brand Name: YD Key Specifications/Special Features: Sleeve Anchor Copper Made, Zinc Plated with Good QualitySIZE DETAILS:I. Material: Q195II. Diameter: M4, 5, 6, 8, 10, 12, 16, 18, 20, 24, 27 (3/16, 1/4, 5/16, 3/8, 1/2, 5/8and 3/4-inch)III. Length: 30 to 250mm
IV. Surface: blue zinc planted
V. Packing: small box andbulk
How To Use
I. Drill or core a hole to the recommended diameter and depth. Clean the hole thoroughly with a hole cleaning brush. Remove the debris with a hand pump, compressed air, or vacuum.
II. Insert the fix bolt shield into the hole, nut end first, and tap with a hammer until it sits flush with the surface of the substrate.
III. Position the fixture over the shield, insert the correct diameter bolt or stud through the fixture and tighten.